The Scarlet Letter Essays (1336 words) - English-language Films

The Scarlet Letter When the topic of a Puritanical society is brought up, most people think of a rigorous, conservative, highly devout society. While this may have usually been the case, this was not always so. The Puritan society was also known not to act out of brotherly, Christian love, but to cruelly lash out on those who sinned or were deemed unfit for society. Two works of literature that display both aspects of this society very accurately are The Scarlet Letter, by Nathaniel Hawthorne, and The Crucible, by Arthur Miller. The Scarlet Letter displays a society that treats two people very differently who commit the sin of adultery together. The woman, Hester Prynne, admits her sin, is forced to always wear a scarlet letter A on her bosom, and is ostracized from society. The man, Reverend Dimmesdale, hides his sin from the world, is almost worshipped by the townspeople, but is filled with the shame of his action. Hawthorne illustrates how insensitive a Puritan society can be t! o those who admit their wrong doings. The Crucible is a play that tells the story of the famous witchcraft trial in Salem, Massachusetts. In the story, Abigail Williams, the orphaned niece of the town?s minister, Reverend Parris, is the main person who accuses people of sending their spirits on her and the other girls. What starts as children dancing in the woods leads to the accusation and execution of many innocent people for witchcraft. The two works of literature have very similar qualities, including setting, conflict, and general aspects of the characters, while there are also specific parallels between characters, such as Abigail and Hester, and Parris and Dimmesdale. The settings in both The Scarlet Letter and The Crucible are similar in many ways. The Scarlet Letter takes place around the 1640s, as the The Crucible occurs in 1692. The time period is very important in both pieces, because it is a time of religious intolerance and a conservative attitude pervades in New England, where both works of literature take place. This Puritan setting is also very important in both works of literature. The reason behind the townspeople persecuting sinners is because of the Puritan beliefs of the time period. This is the driving force between the actions of the characters. The setting of a religiously intolerant village is also the main reason behind the conflict that lies in each plot. The conflicts in both works of literature are also similar. They are both caused by the same thing, the excessively devout town in which the setting takes place. The conflict in The Scarlet Letter that occurs between Dimmesdale, Hester, and Chillingworth is caused by the town?s intolerance for sinners. Hester?s life is spent in complete loneliness because of the way the town treats her. Chillingworth, Hester?s past husband, is like most of the townspeople, because he feels the need to punish and inflict pain on sinners, especially those who have personally harmed him. Chillingworth tries to gain revenge on Dimmesdale, the man who commits adultery with his wife. The town?s desire to seek out and personally condemn sinners is also the source of conflict in The Crucible. In The Crucible, the townspeople hunt out the witches in the community as an attempt to rid the town of evil. In both, the conflict is caused by the town?s self appointed right to rancorously persecute a! nd punish anyone who is found sinning. The conflict is also similar because both towns are generally the same. They are both located in the same general area of America, which causes the people to have similar beliefs and traditions. This includes the townspeople, and the general aspects of the characters. The general aspects of characters are also similar in both The Scarlet Letter and The Crucible. Both have a main antagonist, who wishes to punish sinners. In The Scarlet Letter, this person is Roger Chillingworth, who wants to gain revenge on Dimmesdale, and in The Crucible, the antagonist is Abigail Williams, the girl who mainly accuses the people of being witches. Also, both works of literature include ignorant townspeople who contribute to the main conflict. In The Scarlet Letter, these people are the ones who loathe

Compare the Ways in Which Two Poets Use the Symbol of a Rose and Explore the Effects of Their Words Upon the Reader Essays

Compare the Ways in Which Two Poets Use the Symbol of a Rose and Explore the Effects of Their Words Upon the Reader Essays Compare the Ways in Which Two Poets Use the Symbol of a Rose and Explore the Effects of Their Words Upon the Reader Essay Compare the Ways in Which Two Poets Use the Symbol of a Rose and Explore the Effects of Their Words Upon the Reader Essay Compare the ways in which two poets use the symbol of a rose and explore the effects of their words upon the reader. A rose is most commonly known to represent love and affection towards another person. However, it can be used to symbolize the opposite feelings as the reader understands in the first poem, A Gift of a Rose. Both poems, A Gift of a Rose and A Red, Red Rose describe the rose, but in two very contrasting aspects of love and desire and hatred and blood.A Red, Red Rose, written by Robert Burns, uses positive connotations of the word ‘Rose’ to describe his affections to his love and uses the traditional cliche of a rose to show this. Robert Burns uses a rose in a conventional way to declare his love in a Sonnet form as one would have done in the 18th century. Through the use of repetition of the word ‘Red’ in the title, it suggests a deep and matured love for the other person. Burns confirms this idea of deep love when he sa ys, â€Å"So deep in luve am I,† telling the reader directly what the poem is about.The poem also consists of hyperboles which also show the depth of his love as he is comparing her to all the things he finds beautiful or fascinating, such as â€Å"a red, red rose,† which is also how he sees her. By using a capital letter at the beginning of the words ‘Luve’ and ‘Dear’, it emphasises his affection for the other person and makes the poem seem more loving and affectionate. In contrast, A Gift of a Rose, written by Fred D’Aguiar, does not use a ‘red, red rose’ as a cliche, but instead subverted the word to describe discrimination, hurt and open wounds, with violent diction, metaphorical phrases and negative connotations.This poem describes a discrimination against a black person. The use of a red rose in this poem is to symbolise violence, anger and bloodshed. The use of a red rose gives a sarcastic tone to the poem, reflectin g on the way black people were treated at the time. Metaphors such as â€Å"a bunch of red roses†, meaning several wounds and â€Å"I have a bouquet of my own for them†, meaning many ways of revenge, add to the harshness of the poem and gives a sense of disturbance to the reader as it makes the thorns on a rose much more prominent than the flower itself. Alliteration is also used such as â€Å"a rose for a rose† to add emphasis on etting revenge and the hurt that has been caused. The phrase â€Å"red, red roses† in this poem, suggests a very deep sense of anger and violence inside the victim and in this case, the lack of love towards the person discriminated. When comparing the two poems, the reader discovers that the rose has many different meanings and can be used to symbolise to very contrasting situations of love and of revenge. A Red, Red Rose is a far gentler poem which uses much softer and flowing words such as ‘played’, ‘mileâ⠂¬â„¢, ‘smile’, ‘will’, ‘still’ etc. they all use the letter ‘l’ which adds a lyrical rhythm to the poem.Whereas A Gift of a Rose uses far harsher and violent diction, such as ‘statistic’, ‘ice’, ‘exit’, ‘epithets’ etc, which all use the letter ‘t’ which is harsh sounding and negative. However, both poems do use repetition for example; â€Å"red, red roses† is used in both poems to show the depth of feeling in the writer. The gift of a rose also repeats the words â€Å"rose† and â€Å"flowers† throughout the poem, emphasising the hurt and pain, whereas a red, red rose only has to say the word once to show his love as the sonnet structure of the poem gives the idea away.In conclusion, the word rose can be expressed in several ways and have several meanings which may contradict one another but overall have similar meanings. A gift of a rose uses the symbol of a rose to show revenge, violence, anger and hurt but still use it in symbolising feelings, whereas the feelings shown in a red, red rose, are very much opposite and have an opposite effect on the reader through use of language, metaphors and the meaning of the rose symbol.

Letter to Prime Minister for the Problems Faced by a Chinese Immigrant Essay

Letter to Prime Minister for the Problems Faced by a Chinese Immigrant in Canada Before 1885 - Essay Example Dear Prime Minister, I am writing this letter as an immigrant worker and an affiliate of Chinese community to appeal for investigation and resolution of the problems, which we are facing as Chinese immigrant’s workers. I speak not just for myself but also for my Chinese brothers and sisters who have taken a great role in building this country. In the letter, I will also mention the happenings of the past few years that have resulted in alienation and increased suffering of Chinese living in Canada. Since our migration into Canada, life has been unbearable and we feel unwelcomed not just by Canadian citizens but by the Canadian government. We as Chinese community feel like the Canadian government is using us for their own good while we suffer silently. I am a young Chinese male, currently working in the Pacific Canadian Railway construction though I have done some other menial jobs. I thus have a clear understanding of the extent to which the Chinese migrants are suffering. I am a Chinese immigrant from Guangdong. Right from our entry into Canada, we were welcomed with a lot of hostility. It was inauspicious to be referred to as ‘sojourner’ or temporary workers while some of us were settlers. Some Canadians might have come as temporary workers, but even those who have been here for generations are not excluded from the tortures we undergo. Irrespective of the much risk we undertook to build the Canadian Pacific Railway, our efforts have not been rewarded or appreciated. Your government started portraying hostility towards us when they realized we were almost about to finish the railroad. We know that they fear that we might settle here permanently but we deserve better. We have to do the menial jobs irrespective of out competent skillfulness. I feel like I and my fellow Chinese have persevered enough discrimination and personal attacks. I do not understand why we have to pay extremely high head tax while our work is meant to benefit the Can adians and their government. I might have excused the Canadians for mistreating the first Chinese arrivals but it has been almost a whole century since then and we are still facing the difficulties they faced. I left Guangdong to escape poverty and I find it disheartening to continue suffering irrespective of the hardships I have to undergo as a railway worker to get my daily bread. Being treated as an outsider or an alien is disheartening. Chinamen or non-British alien is the name used to refer to us from Guangdong. This is discriminative and a demonstration of extreme racism, which I believe, you are opposed to. I have been a worker in Canadian Pacific Railway (C.P.R) for over a decade and I feel its time your government acknowledged that we are part of Canadian community. You must have noticed the increasing agitation as we near the completion of the C.P.R. Chinese constructors are being attacked and killed often and no measures have been taken to curb this. I fail to understand why the white, black, and native workers are paid two to three times our wage while we do similar and at times harder works than them. I agonize every day as I watch my brothers sleep hungry and come to work every day. Others die while planting explosives along the railroad construction site. I happened to work at the area near Fraser Canyon, which was the most difficult part of the construction. It was evident that the Chinese who were being paid the least wages comprised the majority of the team working in this site. Countless of them died while planting explosives or digging tunnels. Although we as Chinese rail workers are paid the least wages, we have to pay for our cooking and camping gears while other workers are provided for the above freely. Irrespective of our great role in improving the Canadian economy, we have been denied the right to vote. Additionally, were have been alienated from the political community. The move to form our own community was

Gay Adoption Research Paper Example | Topics and Well Written Essays - 2250 words

Gay Adoption - Research Paper Example Now gay marriage seems to be becoming more acceptable according to a poll done by The Associated Press and the National Constitution Center. â€Å"Fifty-three percent of the 1,000 adults surveyed believe the government should give legal recognition to marriages between couples of the same sex . . . Forty-four percent were opposed† (CBS News). Gay adoption actually is legal in most states, but that does not stop some states and some adoption agencies making it difficult for same-sex couples to adopt. This is despite the large number—over half a million—children languishing in foster care ready and wanting to be adopted. Those in favor of allowing same-sex couples to adopt cite the high numbers of children in foster care needing forever homes. They also claim that it is discrimination not to allow gay couples who have been deemed suitable parents, and who can provide a loving and stable home, to adopt. The courts agreed with them and laws have recently been establi shed that prohibit discrimination against people based on sexual orientation. Because of these anti-discrimination laws, many states no longer allow adoption agencies to discriminate against a gay couple seeking to adopt a child based on the couple’s sexual orientation, but that argument has taken a 360 degree turn. Adoption agencies that oppose gay adoptions say that they are being discriminated against because of their religious beliefs. Some states refuse to recognize same-sex couples’ adoptions in other states. In the end, what has really occurred is a stubborn right-wing anti-gay faction in this country rejects any belief but their own and will not recognize the rights of same-sex couples to adopt children. They refuse to budge and use every tactic they can to promote their agenda even if it means harming children. Several religious adoption agencies have claimed that since they believe homosexuality is against the teaching of the bible, they should not be require d to place children in the homes of gay couples who wish to adopt them. Todd Flowerday says, â€Å"Historically the Catholic Church has invested a great deal of its charitable efforts in the care of orphaned children, but recently adoption has become a battleground for concerns about religious freedom.  The church is reluctant to place children with parents it deems inadequate—most prominently gay and lesbian couples—and these policies often run afoul of state antidiscrimination laws.  Rather than compromise, some Catholic agencies get out of the adoption business altogether† (Flowerday). That, however, has not affected the number of children being adopted. Many other adoption agencies, perfectly willing to follow the law and to continue to match children needing homes with parents who want them, have stepped in. But, another problem has arisen because of this issue. After a Catholic diocese in Rockford, Illinois dropped its state contract with the Illinois Department of Children and Family Service, three other dioceses sued to be exempt from the law that prohibits Catholic, or any other, adoption service from discriminating against gay and lesbian couples. In fact, these adoption agencies must assist these couples in their search for a child. With the injunction in place for who knows how long, the adoption agencies in those three dioceses can continue to deny same-sex couples their rights to adopt a child. What really bothers some people is that instead of thinking of the children as one would expect the Catholic Chur

British Columbia Ambulance Service (BCAS) Research Paper

British Columbia Ambulance Service (BCAS) - Research Paper Example An airevac programme has both a rotary and fixed wing aircraft for efficiency handles special cases. Sometimes BCAS covers other stations on the grounds of emergency and system loads (Llc 42). BCAS is an equal employer. It frequently hires emergency medical responders (EMR), primary care paramedics (PCP), critical care paramedics (CCP), advanced care Paramedics, infant transport team paramedics (IIT) and other management and casuals in accordance to the availability of the vacancy. Eligibility of the applicants has consideration on paperwork completion and more preference on those who have pre employment on the medical field. Formal employments are available to the applicants who are eligible immediately a vacancy is available. The eligibility list becomes active for a full year. The primary requirements for hiring at BCAS requires an individual to have a valid PCP, ITT, CPP, ACP, and EMR license which is issued by the Emergency Medical Assistant Licensing board. A valid driver’s license probably class one, two or 4 BC is mandatory. A legal work entitlement in Canada is also a need alongside A CPR level C certificate with one-year validity. The employee should also satisfy Criminal Record Review act and be of 19 year of age. Grade 12 graduate diploma or its equivalence is the minimal academic qualification. The recruiter gives several written exams as in addition to the first entry exam for eligibility test (David A. Boyes 87). BCAS employee should be of good morals and regular availability for ambulance duties. BCAS accepts applications and follows a given strategy for hiring. For one to be of consideration has to complete the application form for employment. Human resources department does choice of the working area and another clarification before the shortlisted candidate gets an interview invitation for further eligibility gauge. After success in

Design and Simulation of Automatic Load Tap Changer

Design and Simulation of Automatic Load Tap Changer   Introduction CE 3.1 This is the third project I did as a graduate Electrical Engineering while pursuing my Bachelor of Engineering in the field of Electrical Engineering from Balochistan University of Engineering and Technology, Balochistan, Pakistan. I wanted to conduct a project that would enable the transformer to attain different voltage levels using a load tap changing transformer and thus wanted to learn about different electrical/electronic components that would be needed and thus learn about its design and how to implement it. I was able to improve my written and oral presentation skills as well as my interpersonal skills by the successful completion of this project. Background CE 3.2 For my third project as an undergraduate in electrical engineering, I wanted to start working on a project during my second year. I wanted to learn about the different and commonly used electrical/electronic components, the working mechanism and the implementation in complex projects. This served as a motivation to conduct a project on Load Tap changers. I had studied during my bachelors that Transformer Load changers are an integral part to any power grid whether in big projects or small. I knew that there were the Mechanical Load tap changer and the Electronic Load Tap Changer. I wanted to design an automatic Electronic type Load tap changer to the problems with reliability and maintenance of the Mechanical type.Also, I learned that by using Thyristors to take the on-load current while the main contacts change over from one tap to the next, the design would have no moving parts and thus have a longer service life. And it is due to this reason that I selected the Design of Automatic Load Tap Changer for my project. CE 3.3 The objective of this project is to design and build a prototype of a fully electronic on load tap changer for power transformers by using Triacs as switching devices and microcontroller as the triggering circuit. CE 3.4 CE 3.5 I successfully completed this project by engaging in the following activities: I divided my project into Power circuitry and Control circuitry. I designed the power circuitry to basically consist of a tapping transformer connected to the load through the switching devices. I designed the Control circuitry to sense the voltage signal fed from the step down transformer and compare it to a pre-set reference value. I used a Triac which is a three terminal semiconductor for controlling the current in both directions. I used a Power Circuit, Microcontroller Unit, Analog To Digital Converter, Zero Crossing Detector, Multiplexer, LCD, Buzzer as the parts of the circuit I completed the project within the time frame specified by the university. I conducted detailed literature review on all the components used here. Personal Engineering Activity CE 3.6 I approached a professor with an idea of conducting a project with transformers. Along with my team mate, I had a lot of brainstorming sessions and review meetings with my project supervisor to select a suitable topic. I suggested that I work on a project that was concerned with designing and fabricating a system based on Automatic Electronic Load Tap Changer of a Transformer and the supervisor agreed to this and asked us to begin working on this by first conducting a literature review on all the components we would require and the working of this project and to start working on this project. CE 3.7 I first started with the design of the Power circuitry which consists of our main Tapping Transformer. The tapping is provided at 231V, 225V, 220V, 214V, 209V and 0V. Furthermore, I decided to incorporate BTA16 Triacs. I also decided to build a snubber circuit using 100ÃŽÂ © resistor and a 104pF capacitor. I decided to use the Triac instead of the SCR because a triac operates in the same way as the SCR however it operates in both forward and reverse directions. Also, I had to ensure the TRIAC will turn off correctly at the end of each half-cycle of the AC power. And due to this reason I used the snubber circuit to assist in the turning off and on. I used a MOC 3021 to assist with this. Circuitry Diagram The following are the components I used for this project: I used the AT80S8252 Microcontroller or the 89C52 which is a high performance CMOS 8bit microcomputer of sorts. ADC 0804 Analog to Digital Controller which feeds the input to the microcontroller. I used a step down transformer to provide samples to the ADC of the load.-   Zero Crossing Detector to provide the required pulses for the AND logic along with the multiplexer. A Multiplexer or Mux is a device that selects one of several analog or digital input signals and forwards the selected input into a single line.In my project, the Interlocking mechanism is achieved by using Multiplexer. Thus, at any instant of time, no two triacs would be in their ON STATE. This is particularly important and advantageous in case the logic of microcontroller fails. I used a Liquid Crystal Display (LCD) to display the output voltage that would be across the load side. I used an Optocoupler MOC 3021 to transfer signals between different elements of a circuit. CE 3.8 The following is the manner of the working of this project using a block diagram: The block diagram shows the basic strategy, as to how the Load Tap Changer will work automatically. I used TRIACs as the switching devices. I made sure that the The transformer has five tappings at the voltage level. Each of these tappings is connected to the one of the main terminals of the TIRAC. The second main terminals of all the five TRIACS have been shorted. So at any given time when any of the TRIAC has been switched on there is only one conducting path to the load. I used a step down transformer to step down the voltage level to instrumentation levels so that it can be used in the control circuitry. As the voltage increases or decreases depending on the nature of the load the voltage at the primary of the step down transformer varies, resulting in an equivalent variation at the secondary side. I then had to make sure that this sampled AC voltage is rectified to an almost smooth DC value. This DC voltage is then fed to the analog to digital converter, which gives a digital output that can be understood by the microcontroller. The ADC output is fed to the microcontroller which had been already programmed to compare this incoming value to a set of predefined values and send a high signal on one of its port bits. The output of the microcontroller is fed to a multiplexer. It is incorporated to ensure that at any given time, even if the logic fails there is only 1 conduction path to the load. I.e. only one TRIAC is switched on at any instance in time. I also used the zero crossing detector in order to detect the instance when the AC voltage crosses the zero amplitude mark. The output of this zero crossing detector is in the form a pulse generated every half cycle. I then fed the output of the zero crossing detector and the multiplexer to the AND logic as shown in the diagram. Each time the zero crossing detector gives an output, a pulse is generated at the output of the AND logic This output of the AND logic is basically our trigger signal for the switching devices i.e. the TRIACs however in order to isolate the control and high voltage circuitry and to implement DC triggering on the TRIACs operating at AC voltages the Optocouplers have been incorporated. So basically the Optocouplers are only there to provide isolation. CE 3.9 The following are simulation results I obtained: When input is 220v, the Triac on Tap 3 is on. When the input is 225v, the Triac on Tap 2 is on. Summary CE 3.10   Ã‚   I successfully completed the project titled Design and Simulation of Automatic Load Tap Changer along with my team mate. I learned how to build a circuit board and how all the different electrical components talk to each other in this project. I learned how important the Load Tap Changer is for any power grid and how useful it is over the Mechanical type Load type changer. By successfully completing this project, I was able to improve my written, oral and interpersonal skills.

An Examination of the History, Development, and Uses of the Beck Depression Inventory

An Examination of the History, Development, and Uses of the Beck Depression Inventory Maya A. Butler Richmont Graduate University Dr. Aaron Beck is a psychiatrist widely known for developing the Beck Depression Inventory (BDI); a self-assessment instrument used to assess the severity of depression in adolescents and adults. During his work, Beck highlighted the negative thoughts experienced by his patients, and believed it was these thoughts that caused depression within them.From here, Beck developed a three-part thought process that exhibited how a person’s negative view of the world, their future, and themselves affected their depression level (Brown, Hammond, Craske, & Wickens, 1995). These components were used to construct what we have come to know as the Beck Depression Inventory. Throughout test development of the BDI, three separate instruments were created: the BDI, BDI-IA, and BDI-II.The first BDI was developed in 1961 by Aaron Beck, Clyde Ward, Myer Mendelson, John Mock, and John Erbaugh. It could be administered individually or in a group format, in written or oral form, and the test manual indicated total administration time to be no more than 15 minutes, irrespective of the mode of administration (Carlson, p. 117-118). It consisted of twenty-one questions that measured the patient’s feelings within the past week. Each question had four possible answer choices that ranged in depression intensity.In order to score the test, a value between zero and three was assigned to each answer, added, and compared to a key in order to determine the patient’s depression severity. Scores from the BDI could range from 0 to 63, and higher scores indicated severer depression symptoms. Some of the answer items on the BDI had identical numerical value to them, though the statements were not identical. This led to revision of the BDI and introduction of the BDI-IA (Beck, Steer, and Garbin, 1988). The BDI-IA was developed in 1971 by Beck and copyrig hted in 1978.In order to make the test more user-friendly and efficient in measuring depression, similar answer items with identical scoring on a question were removed, and test subjects were asked to evaluate their feelings for a time frame of two weeks instead of one (Beck, Steel, Ball, and Ranieri, 1996). Using the Cronbach’s alpha coefficient of reliability, it was determined the BDI-IA reliability was around 0. 85, suggesting that items on the BDI-IA are highly correlated with one another (Ambrosini, Metz, Bianchi, Rabinovich, and Undie, 1991).However, one of the main problems with this instrument was its inability to address all nine criteria for depression in the Diagnostic and Statistical Manual of Mental Disorders-III (DSM-III). In response to this, the BDI-II was developed. In 1996, the BDI-II was introduced; mainly due to the release of revised criteria for Major Depressive Disorder in the DSM-IV in 1994. Some of the changes made to the BDI-II were the replacement of items that measured changes in body image, work difficulty, and hypochondria.In addition to this, items that measured sleep loss and appetite loss were changed to examine increases and decreases in both sleep and appetite. The entire question wording was changed on the BDI-II except questions used to measure sexual interest, suicidal thoughts, and questions dealing with feelings of being punished. In addition to this, the measuring scale used to evaluate the total points from the BDI-II was changed. When compared with the Hamilton Depression Rating Scale, the Pearson correlation coefficient between this test and the BDI-II was 0. 1, which proves both instruments agree with one another (Beck, Steel, Ball, and Ranieri, 1996). In addition to this, the BDI-II has a Cronbach’s alpha coefficient of 0. 92, surpassing its predecessor the BDI. In addition to improving the relation between its instrument items, the BDI-II can be scored and interpreted via computer software. The BDI- II has expanded well beyond its original intended application with psychiatric populations. In addition to its continued use among this population, it is accepted and commonly used by clinicians as a screening instrument among normal populations (Carlson, p. 17). Because it is designed to reflect the depth of depression, it can be used to monitor changes over time, and objectively measure the likelihood of improvement and the effectiveness of treatment methods (Beck, Ward, Mendelson, Mock, and Erbaugh, 1961). The facts stand that the BDI-II is a simple measure that encompasses the majority of symptoms associated with depression, is easily and rapidly administered, and can be scored and interpreted via computer software. However, it is only a quality instrument when it is used in samples with cooperative subjects; not exaggerated or minimized by the erson completing the instrument (Waller, p. 121). In cases where a person could be motivated to deceive or malinger, the administrator i s advised to use additional or less transparent means of assessment (Carlson, p. 119). In addition to this, the intent and purpose for using the BDI-II is for assessment and not diagnosis. Improper use of this assessment for diagnosing can create falsely positive or negative results. References Ambrosini PJ, Metz C, Bianchi MD, Rabinovich H, Undie A (January 1991). â€Å"Concurrent validity and psychometric properties of the Beck Depression Inventory in outpatient adolescents†.Journal of the American Academy of Child and Adolescent Psychiatry 30 (1): 51–7. doi:10. 1097/00004583-199101000-00008. PMID 2005064. http://www. ncbi. nlm. nih. gov/sites/entrez. Beck AT, Steer RA, Ball R, Ranieri W (December 1996). â€Å"Comparison of Beck Depression Inventories -IA and -II in psychiatric outpatients†. Journal of Personality Assessment 67 (3): 588–97. doi:10. 1207/s15327752jpa6703_13. PMID 8991972. http://www. ncbi. nlm. nih. gov/sites/entrez. Beck AT, Steer RA, G arbin MG J (1988). â€Å"Psychometric properties of the Beck Depression Inventory Twenty-five years of evaluation†. Clin. Psych. Review 8: 77-100.Beck AT, Ward CH, Mendelson M, Mock J, Erbaugh J (June 1961). â€Å"An inventory for measuring depression†. Arch. Gen. Psychiatry 4 (6): 561–71. doi:10. 1001/archpsyc. 1961. 01710120031004. PMID 13688369. Brown GP, Hammen CL, Craske MG, Wickens TD (August 1995). â€Å"Dimensions of dysfunctional attitudes as vulnerabilities to depressive symptoms†. Journal of Abnormal Psychology 104 (3): 431–5. doi:10. 1037/0021-843X. 104. 3. 431. PMID 7673566. http://content. apa. org/journals/abn/104/3/431. (2012, 10). Beck Depression Inventory. StudyMode. com. Retrieved 10, 2012, from http://www. studymode. com/essays/Beck-Depression-Inventory-617021. html

Lives of the Saints Essay

In Shakespeare’s Hamlet and Nino Ricci’s Lives of the Saints both demonstrate different visions of women. Comparing weak and indecisive women in Hamlet as to strong and independent women in Lives of the Saints. Ophelia in Hamlet is characterized many times as a weak women especially in the quote, â€Å"frailty thy name is woman.† She is completely dependent on her father and proves her dependence when she acts cruel to Hamlet. Which goes against her true feelings toward Hamlet. Afterwords Ophelia agrees to not see Hamlet anymore, â€Å" I shall obey my lord.† Which shows Polonious’s control over his daughter. Ophelia’s actions show that she will do anything to please her father, even making a personal sacrifice which she doesn’t agree with. Ophelia’s desire to please her father leads her to be used as a puppet in order for the King and Polonious to spy on Hamlet, Ophelia’s willingness to spy on a person she truly loves, shows her true nature toward her father. Even when Hamlet harasses Ophelia and tells her to go to a nunnery, Ophelia had the inability to defend herself. When her father passes on, Ophelia is left by herself, with no one to give her guidance. Instead of trying to move on with her life, she calls for her brother hoping he will have a plan for her, â€Å"My brother shall know of it and so I thank you for your good counsel.† Polonious’s was irreplaceable and finally Ophelia realizes this â€Å" I would give you some violets, but they withered all when my father died.†The significance of the violets are that they symbolize faithfulness and they all died because she felt useless without her father. Ophelia’s death is in result of her dependence and weakness of character.Overall, Ophelia goes mad because she has no position in society. Men have continuously ordered her around, used her, pulling her mind in every direction. She put her faith in one person and never made her own decisions. Similar to Ophelia is Gertrude. She is also characterized by the quote, â€Å"frailty thy name is woman.† Gertrude depends on her husband. Gertrude longing for the attention that she loses when her husband dies, quickly marries Claudius, her husbands brother. Shakespeare displays that women have no back bone and our weak. As if they could not live with out others, men especially. Nino Ricci demonstrates a whole different side of women, he shows that women are strong and independent. The character that illustrates these qualities is Cristina, she raised her child Vittorio alone. Unlike the women in Hamlet, Cristina didn’t need a man to help her raise her child or to get through life. When her son gets beat up at school, she doesn’t just ignore it. She takes physical action about the situation † I’ll make her pay for this, Vittorio, you’ll see, by the blood of Christ I’ll make her pay. The wiping at some tears in her own eyes, she took me suddenly by the hand and marched me out the door into the street. (107).† Cristina is defiantly not a pushover and stands up for what she believes in. She lives in a village where the women stay at home and the men work out in the field and everyone believed in strange superstitions. Cristina was against her village’s expectations and went against what everyone thought. Cristina is outspoken and self-assured. She has a feminist point of view and is vey confident in it, she says â€Å" He’s probably slept with every whore in America by now, but for me its a disgrace. (154)†. Cristina is explaining about her husband Mario but it is also a statement in general about men. Guys can go around going from girl to girl to girl and its not a problem. But if a women were to do the same thing, even if it was just with one guy its an absolute disgrace. This book was based in 1960 and the same sentence could apply to 2012. Also has significance to the text because she had an affair and the whole town found out, which then they treated her with disgu st. Cristina also states â€Å"Women have had their faces up their asses for too long, they let their men run around like goats and then they’re happy if they don’t come home and beat them! (154)† It is demeaning that women are seen as whores when they have affairs, especially when its said by other women. They’re oppressing their own gender when saying it. She finally decides to move away and says her final words to the village â€Å" You are the ones who are dead,not me, because not one of you knows what it means to be free and to make a choice, and I pray to God that he wipes this town and all its stupidities off the face of the earth! (184)† Most women wouldn’t have spoke there mind, especially a woman like Ophelia or Gertrude. Cristina constantly fought with her father and always disagreed â€Å"Long arguments were carried on daily between kitchen and bedroom, tension hovering around.(154).† She finally got fed up with living with her father and hearing his opinion she said â€Å" Then to hell with all of you! I’ll go to Rome, Naples, anywhere.† She had the courage and strength to leave her father and start a life somewhere else, mean while Ophelia couldn’t last a couple days with out her father and killed her self. Nino Ricci illustrates women to be outspoken, independent and powerful. In the end of each story both women characters die. The difference is the way they lived their life. Cristina at least lived her life, standing up for what she believe in and having her own opinion. As for Ophelia lived a lie, as she was a spineless imbecile always doing what others told her to do and had a pathetic death. Shakespeare and Nino Ricci may have very different vision on women but at the same time they are both very accurate views.

How to Learn Multiplication Timestables in 21 Days

How to Learn Multiplication Timestables in 21 Days Lets face it, when you dont know your times tables, it slows down your progress in math. Some things you just have to know and committing the times tables to memory is one of them. Today, were in an information age, information is doubling faster than it ever used to and our math teachers no longer have the luxury of assisting us to learn the times tables. In case you havent noticed, the math curriculum is much larger than it ever was. Students and parents are now left with the task of helping to commit the times tables to memory. So lets get started: Step 1 First of all, you will need to be able to skip count or count by a certain number. For instance 2,4,6,8,10 or 5, 10, 15, 20, 25. Now you will need to use your fingers and  skip counting. Remember back in grade 1 when you used to use your fingers to count to 10? Now youll need them to skip-count. For example, use your fingers to count by 10. First finger or thumb is 10, second is 20, third is 30. Therefore 1 x 10 10, 2 x 10 20 and so on and so forth. Why use your fingers? Because its an effective strategy. Any strategy that improves speed with your tables is worth using! Step 2 How many skip counting patterns do you know? Probably the 2s, 5s and 10s. Practice tapping these out on your fingers. Step 3 Now youre ready for the doubles. Once you learn the doubles, you have the counting up strategy. For instance, if you know that 7 x 7 49, then youll count up 7 more to quickly determine that 7 x 8 56. Once again, effective strategies are almost as good as memorizing your facts. Remember, you already know the 2s, 5s and 10s. Now you need to concentrate on 3x3, 4x4, 6x6, 7x7, 8x8 and 9x9. Thats only committing 6 facts to memory! Youre three-quarters of the way there. If you memorize those doubles, youll have an effective strategy to quickly obtain most of the remaining facts! Step 4 Not counting the doubles, you have the 3s, 4s, 6s, 7s and 8s. Once you know what 6x7 is, youll also know what 7x6 is. For the remaining facts (and there arent many) you will want to learn by skip-counting, in fact, use a familiar tune while skip counting! Remember to tap your fingers (just as you did when  counting) each time you skip count, this enables you to know which fact youre on. When skip counting by 4s and when youve tapped on the fourth finger, youll know that its the 4x416 fact. Think of Mary Had A Little Lamb in your mind. Now apply 4,8, 12, 16, (Mary had a....)and continue on! Once youve learned to skip-count by 4s as easily as you can by 2s, youre ready for the next fact family. Dont worry if you forget the odd one, you will be able to fall back on your doubling strategy and counting up. Remember, being able to do math well means having great strategies. The above strategies will help you learn the times tables. However, you will need to commit daily time to these strategies to learn your tables in 21 days. Try some of the following: Each day when you wake up, skip count the fact family youre working on.Each time you walk through a doorway, skip count again (silently)Each time you use the washroom, skip count!Each time the phone rings, skip count!During every commercial when youre watching TV, skip count! When you go to bed each night, skip count for 5 minutes.If you stick it out, youll have your tables memorized in 21 days!Here are a few multiplication tricks to help you. Try these worksheets which are developed to correspond to the correct way of learning your multiplication tables.

Investigating a pollutants effect on cress seeds Essay Example

Investigating a pollutants effect on cress seeds Essay Example Investigating a pollutants effect on cress seeds Paper Investigating a pollutants effect on cress seeds Paper To investigate the effect of phosphates from detergent liquid, at different concentrations, on the germination of cress seeds. Hypothesis: I predict that, at lower concentrations, the detergent liquid containing phosphates will have a small positive effect on growth. However, I believe at stronger concentrations, the detergent liquid will have a negative effect on growth, causing stunted and malformed cress plants. Introduction: Many commercial detergent liquids contain phosphate. Phosphate, (PO43-) is an important inorganic macronutrient which is needed to help plant growth, and as such is a part of the essential small molecule ATP. Although it can be hard to test whether minerals are important in animals, it is far easier to test the effects of phosphate (which in this case will form part of a pollutant). The main reason for my hypothesis is that phosphates can cause eutrophication when found in a water supply, and as such I believe that small percentages (10-20%) detergent liquid will case minor positive changes in growth. However, there are other chemicals present (such as Benzotriazole, colorants and purfumes) in detergent liquid that may cause the cell wall and cell membrane of the cell to break down allowing the cell contents to spill out and the leaves will appear discolored. This may also cause the cress to grow slowly or die prematurely. There may also be an appearance of leaf tip necrosis, iron deficiencies, and some seeds may fail to germinate due to imbalances in the pH of the soil. You dont say why there may be a pH imbalance. Cress is a seed which is exceptionally easy to cultivate, and as such will be the plant used for my experiment. Germination in plants occurs when there are suitable conditions. Germination requires water, oxygen and an appropriate temperature. Water is necessary because the final stage in the creation of a seed is a drying out of embryonic tissues. This means that a huge inward water gradient is created, allowing easy osmosis into the seed. Seeds typically absorb so much water that they swell into 1.5 times the size of the seed (statistic taken from broad beans). This is obviously important in measuring the different growth patterns when using different concentrations of a pollutant, as my pollutant (as many pollutants are) will be found solely in the water source of the plant, and will thus have a great effect on a germinating plant. Plan: Some preliminary tests were carried out prior to the experiment to find the best medium for cress growth and the preferable environment for their germination. These are presented and discussed in my appendix, which is found below. This is the reason for using 2 layers of kitchen paper to grow my seeds in, as well as placing them by a large, light window. The aim of this experiment is to add variable concentrations of a phosphate containing detergent to cress seeds water supply and measure the effect upon their germination and growth. The independent variable used will be the detergent concentration and the dependent variables are percentage germinated and the growth rate. I will use a Spearman rank correlation test to determine whether these two variables are linked. Justifications I will be using pipettes and a pipette filler because these are more accurate than traditional pipettes. I require several different pipettes to ensure that each one is not contaminated with a previous concentration of liquid. I will be using tweezers to place my seeds in the grid as these allow me to grip and place my seeds accurately. I plan to repeat each experiment (to obtain two results for each value). This is to restrict the chances of a faulty result skewing results. Ideally, I would repeat these tests many times, but as the experiment is quite slow, and placing too many petri dishes by my window might obscure the light available, Ive decided upon two results. The seeds will be grown for 7 days as my preliminary tests show that 7 days is perfectly adequate time for the cress seeds to germinate and grow to a measurable length. I plan to use cress seeds from the same packet throughout my experiment, as cress seeds found in different places may have different resistance to phosphates. This is because the detergent I am using may have been present in an irrigation system used to when the seeds were produced, and thus using a mixture of seeds would give a mixture of tolerances against phosphates. I plan to use the same amount of liquid throughout my experiment (20ml initially) as using varying amounts may affect my results. This is because plants need water to grow, and thus those with access to more water will probably grow both faster and further than those with less water. It is thus important to keep them as constant as possible. I have chosen to use 50 seeds at each concentration. This will reduce the chance of a percentage error. If using 10 seeds and one fails to germinate, this will be a 10% percentage error, whereas if one fails to germinate with 50 seeds, this gives only a 2% percentage error. This is a simple and effective way of reducing the percentage error. Sufficient replicates to assess reliability of data. Issues highlighted by my preliminary experiments Considering the results of my preliminary tests, I will be growing my cress inside by a window so that it has plenty of access to light and warmth. I will be growing my cress in petri dishes on two circular pieces of kitchen paper. I will be covering each dish with a piece of transparent film slightly larger than the dish itself. This is because the kitchen paper tends to dry out quickly, which would obviously prevent germination and negatively effect plant growth. The reason for using a piece of transparent film is because this will let light through. I will not be sealing these, as this will prevent air getting to the cress, which it requires for growth. This method prevents the seeds from drying out too quickly, although I will still be watering them at intervals specified before. In my preliminary tests, I measured the seed growth by their length above the seed and root length. However, this may not be accurate as some cress seedlings may have longer roots, and longer roots also indicate growth. For this reason I have decided to measure the shoot and root length combined of my seedlings. Ensuring consistancy I need to ensure that the amount of liquid present stays constant, and thus need to ensure that the dilutions of detergent liquid have appropriate amounts of distilled water. I will be using 20ml of water for the control, and various concentrations made up to 20ml for the other experiments. I need to ensure that the environment of the plants stays as consistent as possible throughout the experiment, and thus need to choose a window with enough space beneath it to give equal light to all the plants. I need to ensure that the cress is spread in the same way in each experiment. To give maximum space to each seed, I have chosen the following layout: This gives me enough room for 25 cress seeds in each experiment. I will need to ensure that the temperature around the petri dishes is kept constant between all petri dishes, as an inconsistency will have a small effect on growth. To do this, I shall measure the temperatures near each dish twice daily and record and adjust any anomalies. The petri dishes will need to be clearly labeled with concentration and experiment number (either 1 or 2) so as to avoid confusion when collecting results.

Reccession of 2008 and Great depression Essay Example | Topics and Well Written Essays - 2000 words

Reccession of 2008 and Great depression - Essay Example HSBC which is the global largest bank wrote down its holdings of subprime mortgage backed securities by $ 10.5 billion while more than other 100 mortgages companies were either shut down or suspended their operations.US and European Banks lost more than $ 1 trillion on toxic assets during the financial crisis. Northern Rock which was a British bank, was highly leveraged could not obtain credit in the financial markets. Bear Stearns collapsed in March 2008. Other financial institutions made bad losses and were subject to government take over. Lehman Brothers, Fannie Mae, Freddie Mac and AIG made a lot of losses during the crisis (Halm-Addo 4). Various limits to arbitrage can help explain why assets were selling below their fundamental level at the height of the financial crisis. Constrains to short selling does not account for the assets selling below their fundamental prices. Short selling was evident since investors made speculative short sale bets against the financial assets which made the prices to decline. For instance, short selling led to drop in the value of Lehman Brothers stocks. US Securities and Exchange Commission imposed at temporary ban on short selling since it this method of trading reduced the market confidence and the stability of financial assets (Halm-Addo 40). The â€Å"too big to fail† notion led to moral hazards, bail outs and increased the Fed’s balance sheet. Adverse selection was not caused by the notion of â€Å"too big to fail†. The notion created moral hazard since the financial institutions engaged in predatory lending like Countrywide Financial which advertised low interest rate loans for home refinancing. The notion made banks to borrow short term in liquid markets and purchase long term illiquid assets which were risky. The notion led to the bail out where $ 700 billion Troubled Assets Relief Program was created to rescue the

Global plan strategy Research Paper Example | Topics and Well Written Essays - 2500 words

Global plan strategy - Research Paper Example Strategizing is always considered to be the most appropriate way for new businesses to go about daily operation, hence the need for this paper. Introduction It is estimated that about 83% of adults in the United States of America take coffee. According to this figure, U.S remains the world major consumer of coffee. According to a New York-based group, 63% of adults consume coffee on a daily basis compared to 65% annually. Daily intake of gourmet-coffee remains stiff with about 31% of the total users as compared to other brands whose intake fell drastically; this is according a New York based research company. Arabica-coffee prices have dropped in New York with a margin of 5.8% recently, while in London, Robusta prices have gained almost 12% (FAO p64). Arabica is mainly found in Latin America and manufactured by giant companies such as Starbucks and McDonald. Robusta Beans, majorly used in instant coffee are widely cultivated in Asia and some parts of Africa. Brazil has posed to be th e second largest consumer after U.S.A, trailed by Germany as per the International Coffee Organization which is based in London. These are some of facts and figures that lured Dorato partners to initiate the business. With these challenging financial periods, it is appropriate for the company to strategize to avoid flopping in the event of their operations. Firm Analysis Company overview: Dorato was founded in the year 2012 after top investors who are the main financers agreed to partner in order to come up with the coffee business. Dorato is meant to provide coffee beverages in and outside U.S. The firm has received it funds through major donations from friends, at the same time the partners have used their assets to acquire loans from various financial institutions in the United States. Management philosophy: Quality in products and services to customers and staff members is Dorato’s top priority. Dorato believes that increased quality production and services gained from th e staff members is expedited by a conducive working environment. An environment that appreciates good work performance, flexible, prize fairness encourages free communication and respecting the views of individuals. This optimizes Dorato staff’s performance and health. Self-esteem to attain excellence maximizes especially when the staff members are handled with trust, decency and respect. Quality in Performance: - Dorato has an interest for tracking its mission to improve coffee selling as a business and profession and as a way of promoting farming, uptake of coffee, good business practices and culture. This passion is shown by workers’ perseverance, patience and dedication to advancing coffee uptake. Dorato managers are always available to provide assistance to staff; this is achieved by setting achievable goals, schedules and timetables for its goods and services and inspires staff members to be responsible as a result of its products and services integrity. Excellen t Customer Services: - Dorato strongly believes in its customers and value of relationships, both internally and externally. To satisfy customers, Dorato management